| SaniForce 2150 Diaphragm Pumps |
| Maximum fluid working pressure | 120 psi 8 bar, 0.8 MPa |
| Air pressure operating range | 20–120 psi 1.4–8 bar, 0.14–0.8 MPa |
| Maximum air consumption | 175 scfm 3 |
| Air consumption at 70 psi, 50 gpm | 70 scfm 3 |
| Maximum free-flow delivery | 160 gpm 568 lpm |
| Maximum pump speed | 165 cpm 165 cpm |
| Gallons/liters per cycle* | 0.97 g 3.7 l |
| Maximum suction lift | 29 ft wet, 16 ft dry 8.8 m wet, 4.9 m dry |
| Maximum size pumpable solids | 1/4 in 6.3 mm |
| Noise Data** |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 95 dB(A) 95 dB(A) |
| Sound power level | 102 dB(A) 102 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 84 dB(A) 84 dB(A) |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings |
| PTFE | 220°F 104°C |
| Santoprene? | 180°F 82°C |
| EPDM | 275°F 135°C |
| Polychloroprene | 200°F 93°C |
| Stainless Steel | 250°F 121°C |
| Inlet/Outlet Sizes |
| Air inlet size | 0.5 in npt(f) 0.5 in npt(f) |
| Fluid inlet size | 2.5 in sanitary flange 2.5 in sanitary flange |
| Fluid outlet size | 2.5 in sanitary flange 2.5 in sanitary flange |
| Wetted Parts*** |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. |
| Wetted materials on all models | 316 stainless steel 316 stainless steel |
| Wetted materials depending on model | EPDM, Polychloroprene, PTFE, Santoprene EPDM, Polychloroprene, PTFE, Santoprene |
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% |
| Non-wetted external parts | 300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket) 300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket) |
| Weight |
| FD2 Models | 147 lb 66.7 kg |
| FA1 Models | 141 lb 64 kg |
| Loctite? is a registered trademark of the Loctite Corporation. |
在线交流
咨询电话
