Graco固瑞克Glutton 4:1柱塞泵技术参数 Graco 的 Glutton 泵非常适合在常规和HVLP 工厂应用的循环系统中抽吸有研磨作用的固体比例高的涂料（50% 或更高）。
采用波纹管式密封设计，不会有密封条暴露在大气中，从而可减少维护需求
采用波纹管密封设计即可不用常规的喉部密封，为对水分敏感的涂料带来可靠性高
可逆的出口歧管简化了水管设施安装
垂直球阀设计确保球的磨损保持均衡并确保其较长的使用寿命。 | Glutton 400 Plunger Pumps | | Maximum Fluid Working Pressure | 400 psi 28.0 bar, 2.8 MPa | | Maximum Air Input Pressure | 100 psi 7.0 bar, 0.7 MPa | | Air Operating Range | 25–100 psi 1.73–7.0 bar, 0.07–0.7 MPa | | Maximum Continuous Pump Speed | 60 cpm 60 cpm | | Fluid Flow at 60 cpm | 5.6 gpm 21.2 lpm | | Fluid Volume per Cycle | 0.096 gal 0.366 l | | Maximum Suction Lift (water) | 15 ft 4.57 m | | Maximum Operating Temperature | 150°F 65°C | | Air Inlet | 1/2 npt(f) 1/2 npt(f) | | Fluid Inlet | 1.25 npt(f) 1.25 npt(f) | | Fluid Outlet | 1 npt(f) 1 npt(f) | | Weight | 80.5 lb 36.2 kg | | Wetted Parts | | Model 220663 and 237008 | Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220663 only), nylon (237008 only), PTFE Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220663 only), nylon (237008 only), PTFE | | Model 220666 and 237011 | 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, ultra high molecular weight polyethylene (220666 only), nylon (237011 only) , PTFE |
Glutton 4:1 柱塞泵 不用常规的喉部密封，为对水分敏感涂料带来可靠性高 波纹管式密封泵非常适合在常规和HVLP 工厂应用的循环系统中抽吸有研磨作用的固体比例高的涂料。 |
在线交流
咨询电话
