固瑞克Glutton12:1和25:1柱塞泵技术资料 Glutton 的波纹管密封设计泵非常适合风送和无气喷涂应用。 *的分离式双柱塞泵设计用于处理对切变和热更加敏感的涂料。 采用波纹管密封设计即可不用常规的喉部密封，为对水分敏感的涂料带来可靠性高
可逆的出口歧管简化了水管设施
垂直球阀设计确保球的磨损保持均衡和使用寿命长。 | Glutton 1200 Plunger Pumps | | Maximum Fluid Working Pressure | 1200 psi 83.0 bar, 8.3 MPa | | Maximum Air Input Pressure | 100 psi 7.0 bar, 0.7 MPa | | Air Operating Range | 25–100 psi 1.73–7.0 bar, 0.07–0.7 MPa | | Maximum Continuous Pump Speed | 60 cpm 60 cpm | | Fluid Flow at 60 cpm | 2 gpm 7.5 lpm | | Fluid Volume per Cycle | 0.034 gal 0.128 l | | Maximum Suction Lift (water) | 15 ft 4.57 m | | Maximum Operating Temperature | 150°F 65°C | | Air Inlet | 1/2 npt(f) 1/2 npt(f) | | Fluid Inlet | 1.25 npt(f) 1.25 npt(f) | | Fluid Outlet | 1 npt(f) 1 npt(f) | | Weight | 78 lb 35.1 kg | | Wetted Parts | | Model 220664 and 237009 | Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220664 only), nylon (237009 only), PTFE, Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220664 only), nylon (237009 only), PTFE, | | Model 220667 and 237012 | 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, ultra high molecular weight polyethylene (220667 only), nylon (237012 only), PTFE 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, ultra high molecular weight polyethylene (220667 only), nylon (237012 only), PTFE |
| Glutton 2500 Plunger Pumps | | Maximum Fluid Working Pressure | 2500 psi 170 bar, 17 MPa | | Maximum Air Input Pressure | 100 psi 7.0 bar, 0.7 MPa | | Air Operating Range | 25–100 psi 1.73–7.0 bar, 0.07–0.7 MPa | | Maximum Continuous Pump Speed | 60 cpm 60 cpm | | Fluid Flow at 60 cpm | 0.9 gpm 3.4 lpm | | Fluid Volume per Cycle | 0.015 gal 0.058 l | | Maximum Suction Lift (water) | 6 ft 1.83 m | | Maximum Operating Temperature | 150°F 65°C | | Air Inlet | 1/2 npt(f) 1/2 npt(f) | | Fluid Inlet | 1.25 npt(f) 1.25 npt(f) | | Fluid Outlet | 3/4 npt(f) 3/4 npt(f) | | Weight | 61 lb 27.5 kg | | Wetted Parts | | Model 220665 and 237010 | Carbon steel, stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220665 only), nylon (237010 only) Carbon steel, stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220665 only), nylon (237010 only) | | Model 220668 and 237013 | 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220668 only), nylon (237013 only) |
|
在线交流
咨询电话
