流量控制阀vpcf响应时间短，重复性好，准确性和紧凑的设计

VPCF stands out with it short response times, good repetition accuracy and a compact design. This PWIS-free valve with ATEX certification is therefore especially well suited for inert gas applications, and for controlling air flow rates and speed in painting and flow systems.

费斯托vpcf脱颖而出与响应时间短，重复性好，准确性和紧凑的设计。这自由阀PWIS ATEX认证因此特别适合于惰性气体的应用，以及用于控制空气流量和绘画与流动系统的速度。

The flow control valve VPCF regulates flow for connected pneumatic consuming devices. Flow resistance and fluctuations in the compressed air supply at the consuming device are irrelevant. The required sensors and the closed-loop control system are already integrated into the flow control valve VPCF. As a result, it meets the most demanding requirements for dynamic response, repetition accuracy and linearity of the characteristic curve. The shorter cycle times made possible by the valve lead to increased quantities – with considerably reduced costs. Thanks to ATEX certification, the VPCF can be installed directly within the Ex zone. This reduces compressed air consumption and tubing lengths.

费斯托流量控制阀vpcf调节连接气动耗能设备流程。在消费设备的压缩空气供应的流动阻力和波动是不相关的。所需传感器和闭环控制系统已经集成到流量控制阀vpcf。其结果是，它满足zui苛刻的要求，动态响应，重复精度和线性特性曲线。阀门的短周期时间越短，导致的数量增加，大大降低了成本。多亏了vpcf ATEX认证，可直接安装在防爆区内。这减少了压缩空气消耗和油管长度。

The setpoint value for the flow rate can be specified using an analogue interface (0 to 10 V or 4 to 20 mA). The maximum flow rate for the VPCF is 1500 litres per minute at 10 bar. The compact dimensions, easily accessible pneumatic connections and simple actuation of the VPCF mean that it can be arranged flexibly and mounted just about anywhere – even in existing systems

FESTO流量控制阀对流量的设定值可以通过模拟接口（0至10 V或4到20 mA）。为vpcfzui大流量为1500升每分钟10杆。紧凑的尺寸，方便的气动连接的vpcf意味着简单的动作，它可以灵活布置，安装在任何地方–即使在现有的系统